HP-9005 High-Efficiency Fluoride Removal Agent
High-Efficiency Fluoride Removal Agent HP-9005 is a chemical agent specifically developed for tackling low-concentration fluorine-containing wastewater, focusing on the advanced treatment stage; it is suitable for the treatment of fluoride excess in wastewater from various industries.
Product Property
Specifically designed for the upgrading and advanced treatment of low-concentration (≤20mg/L) and highly challenging fluoride wastewater.
Can replace resins and adsorbents, significantly reducing floor space and investment costs.
Calcium free and won’t cause blockage of system pipes and other components.
There are no free aluminum ions in the product, and the filtrate has no impact on the biochemical system.
The processing equipment is simple. It takes effect immediately after addition and does not require complex debugging.
Smaller dosage and better efficacy compared with other fluoride removal agents.
Reaction completes within 10 to 15 minutes, achieving a fluoride removal rate surpassing 98%.
(1)Method of Application
Experimental Procedure
- Measure fluoride concentration in wastewater；
- Take 1 L raw water, calculate dosage of high-efficiency defluorination agent HP-9005 at a ratio of fluoride content: defluorination agent = 1 mg/L: 05 g. Dissolve the agent in minimal clean water, then add to wastewater;
- Stir and react for 10 minutes;
- Adjust pH to 6-7 using sodium hydroxide;
- Add a quantified 0.1% anionic PAM until distinct sludge-water separation occurs, followed by sedimentation;
- Measure fluoride concentration in the supernatant.
(2) On-site Application Procedure
Determine dosage based on bench-scale test results;
Execute chemical dosing strictly according to the operational protocol provided by Gosun during wastewater treatment.
Specifications
|
Items |
Specs |
|
Appearance |
Orange-yellow powder (The product is prone to dissolution and moisture absorption. A small amount of lumps may occur and does not affect its use.) |
|
Content |
≥99% |
Package: 25kg/plastic bag, or as per customers’ request.
Storage: Avoid direct sunlight exposure. Store at room temperature indoors. (Freezing may occur when temperatures drop below 0°C, but thawing restores the product to its original state without compromising efficacy), Shelf life: 12 months.
Safety Precautions: MSDS are available upon request to address relevant safety information.
